楚天风采22选5走势图

欢迎来到济南天麒液压机械有限公司官方网站!
全国咨询热线0531-84277123
您的位置: 楚天风采22选5走势图>> 工程案例 >>行业资讯

ZIXUNREXIAN

15628816012

液压升降机检修時间的要求与维护保养

作者:天麒液压机械 浏览:124 时间:2019-10-16 cp199199.com楚天风采22选5走势图

信息摘要:

YEYASHENGJIANGPINGTAIGONGZUOZHONG1500ZHONGTOUHOU,DUIJIXIESHEBEI、DIANLUXITONGKAIZHANXIAOXIU。

液压升降机检修時间的要求与维护保养

楚天风采22选5走势图 YEYASHENGJIANGJIJIANXIUSHIJIANDEYAOQIUYUWEIHUBAOYANG

Requirements and Maintenance of Hydraulic Lift Maintenance Time

1、PINGSHIWEIHUBAOYANG(MEIGEBANKAIZHAN)。

1. Maintenance in peacetime (carried out in each class).

2.YEYASHENGJIANGPINGTAIGONGZUOZHONG1500ZHONGTOUHOU,DUIJIXIESHEBEI、DIANLUXITONGKAIZHANXIAOXIU。

2. After 1500 hours of work on the hydraulic lifting platform, minor repairs have been made to the mechanical equipment and circuit system.

3.YEYASHENGJIANGJIGONGZUO5000XIAOSHIHOU,DUIJIXIE、DIANQIXITONGJINXINGZHONGXIU。

3. After 5000 hours of operation, the hydraulic elevator will be repaired in the middle of the mechanical and electrical systems.

楚天风采22选5走势图 4.YEYASHENGJIANGPINGTAIGONGZUOZHONG10000ZHONGTOUHOU,DUIJIXIESHEBEI、DIANLUXITONGKAIZHANWEIXIU。

楚天风采22选5走势图 4. After 10,000 hours of work on the hydraulic lifting platform, the mechanical equipment and circuit system are maintained.

YEYASHENGJIANGJIJIXIESHEBEIDEWEIHUYUBAOYANG:

楚天风采22选5走势图 Maintenance and maintenance of mechanical equipment of hydraulic elevator:

楚天风采22选5走势图 1.GEZUZHIDEZHIDONGXITONGYINGCHANGCHANGKAIZHANDINGQIJIANCHADIAOJIEZHIDONGXITONGWAHEZHIDONGXITONGLUNDEKONGXI,QUEBAOLINGBIANKAOPU。ZAIMOCABIAOMIAN,BUXUYOUFEIQIWUCUNYOU,RUYUFEIQIWUWUBIYONGCHEYONGQIYOUHUOXISHIJIXIQU。

1. The braking system of each organization should regularly check and adjust the gap between the braking system Bush and the braking system wheel to ensure that the braking system is convenient and reliable. No waste is needed on the friction surface. In case of waste, wash it off with gasoline or diluent.

2.JIANSUXIANG、BIANSUXIANG、WAINIEHECHILUNDENGGEBUFENDERUNHUAYIJIYEYAYOUJUNANRUNHUABIAOZHONGDEYAOQIUJINXING。

2. The lubrication of gearbox, gearbox, external meshing gear and other parts as well as the hydraulic oil are carried out according to the requirements of the lubrication table.

3.YAOLIUYICHAYANGECHUDUXINGANGSISHENGYOUMEIYOUDUANSIHESONGGUZHUANGKUANG。RUCHAOCHUXIANGGUANYAOQIUWUBIMASHANGGENGHUAN。DUXINGANGSISHENGDEWEIXIUBAOYANGYINGYANKEANgb5144-85YAOQIU。

3. Attention should be paid to checking whether the galvanized wire rope is broken or loose. If it exceeds the relevant requirements, it must be replaced immediately. Maintenance of galvanized steel wire rope should strictly comply with the requirements of gb5144-85.

4.CHANGCHANGCHAYANGECHUDELIANJIEZHUANGKUANG,RUOYOUSONGTUOYINGYUYINIUJIN。RENTILIANJIEDIJIAOLUOSHUANYINGZAIRENTISHOULISHICHAYANSONGJIN(KEXUANYONGZHUANDONGBEIDEFANGSHI QUDAOZHISHOULIQINGKUANG),QUANBULIANJIESHAOZHOUDOUWUBIYOUKAIKOUXIAO,BINGXUSHENKAICHONGZU。

4. Always check the connection condition everywhere and tighten it if it is loose. The bolt of human connecting grounding foot should be checked tightly when the human body is under stress (the way of rotating arm can be selected to cause the stress). All connecting slightly shafts must have open pins and need to be stretched adequately.

5.JINGCHANGJIANCHAGEJIGOUYUNZHUANSHIFOUZHENGCHANG,YOUWUZAOYIN,RUFAXIANGUZHANG,BIXUJISHIPAICHU。

5. Check regularly whether the institutions are functioning properly and whether there is noise. If faults are found, they must be eliminated in time.

6.ANZHUANG、CHAIZHUANGHEDIAOJIEXUANZHUANZUZHISHI,YAOLIUYIQUEBAOXUANZHUANZUZHIJIANSUJIDEZHOUXIANYUCHUANDONGCHILUNZHOUXIANPINGXINGMIAN,QICHIHEMIANBUDIYU70%,CHIHEKONGXIYAOHESHI。

6. When installing, disassembling, assembling and adjusting the rotating organization, attention should be paid to ensuring that the axis of the rotating organization reducer is parallel to the axis of the transmission gear, and that the tooth contact surface is not less than 70%, and the tooth gap should be appropriate.

楚天风采22选5走势图 7.CHANGCHANGCHAYANQUANBUDEDIANLANXIAN、DIANLANYOUWUSUNSHANG。YAOJISHIDEBAOZHAHEGENGHUANYISUNSHANGDEBUFEN。

7. Always check all cables and cables for damage. The damaged parts should be dressed and replaced in time.

8.YUDAODIANDONGJIYOUGUOREXIANXIANGYAOJISHITINGCHE,PAICHUGUZHANGHOUZAIJIXUYUNXING,DIANJIZHOUCHENGRUNHUAYAOLIANGHAO。

楚天风采22选5走势图 8. When the motor is overheated, stop in time and continue to run after troubleshooting. The motor bearings should be lubricated well.

楚天风采22选5走势图 9.GEYIBUFENTANSHUA,QIBIAOMIANYAOQINGJIE,DIAOJIETANSHUAGONGZUOYALI,SHIQICHUPENGZONGMIANJIBUDIYU50%。

楚天风采22选5走势图 9. The surface of each part of the carbon brush should be clean, and the working pressure of the carbon brush should be adjusted so that the total touching area of the carbon brush should not be less than 50%.

楚天风采22选5走势图 10.YEYASHENGJIANGPINGTAIDEGEKONGZHIJU、PEIDIANJUDENGCHANGCHANGQINGJIE,LIJIQINGLIDIANQISHEBEISHANGDECHENTU。

10. The control cabinets and distribution cabinets of the hydraulic lifting platform are often cleaned and the dust on the electrical equipment is cleaned immediately.

YOUGUANYEYASHENGJIANGPINGTAIDEWEIHUBAOYANGSHIMEIYIGONGSIYINGYONGJIQISHEBEIDEBIXIUKE,KEYIGENGQIANGDEQUEBAOSHANGPINDETEXINGHEYEYASHENGJIANGPINGTAIDESHIYONGQI,YINCIANSHIDEWEIXIUBAOYANGSHIBIXUYAOZUODE

楚天风采22选5走势图 Maintenance of hydraulic lifting platform is a compulsory course for every company to apply machinery and equipment. It can ensure the characteristics of commodities and the service life of hydraulic lifting platform more strongly. Therefore, timely maintenance is necessary.

http://cp199199.com